70-410試験感想、70-334受験準備
NO.1 HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a print
server named Print1 that runs Windows Server 2012 R2.
Print1 has 50 shared printers. Each printer is listed in Active Directory.
From Active Directory Users and Computers, you browse to Print1 and you discover that the 50
printers are not visible.
You need to ensure that you can view the printer objects in Active Directory Users and Computers.
Which option should you select? To answer, select the appropriate option in the answer area.
Answer:
In the Active Directory Users and Computers snap-in you should navigate to the Users,
Contacts, Groups, and Computers as containers tab if you want to view printer objects that
are shared.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 5: Active
Directory Administration, Lesson 1: Administering Active Directory objects using ADAC,
NO.2 DRAG DROP
You have a server named Server1 that runs Windows Server 2012 R2.
You add a new internal SAS disk to Server1.
You need to ensure that the new disk is available to store files.
Which three cmdlets should you run in sequence?
To answer, move the appropriate three cmdlets from the list of cmdlets to the answer area
and arrange them in the correct order.
Answer:
Explanation:
Box 1: Initialize-Disk Box 2: New-Partition Box 3: Format Volume Note:
*The following script accomplishes these four tasks (listed below):
Initialize-Disk -PartitionStyle MBR -PassThru |
New-Partition -AssignDriveLetter -UseMaximumSize |
Format-Volume -FileSystem NTFS -NewFileSystemLabel "disk2" -Confirm:$false
*Use PowerShell to Initialize Raw Disks and to Partition and Format Volumes With Windows
PowerShell 3.0 in Windows 8 or Windows Server 2012, I can perform all of these operations via
Windows PowerShell functions from the Storage modulE. The process is the same as I would do via
the Disk Management tool. The steps are:
Get the disk that has a raw partition stylE.
Initialize the disk.
Partition the disk.
Format the volumE.
*Serial Attached SCSI (SAS) is a point-to-point serial protocol that moves data to and from computer
storage devices such as hard drives and tape drives.SAS replaces the older Parallel SCSI (Small
Computer System Interface, pronounced "scuzzy"), bus technology that first appeared in the mid-
1980s.SAS, like its predecessor, uses the standard SCSI command set.SAS offers backward
compatibility with SATA, versions 2 and later. This allows for SATA drives to be connected to SAS
backplanes. The reverse, connecting SAS drives to SATA backplanes, is not possible.
NO.3 You perform a Server Core Installation of window Server 2012 R2 on server named Server1.
You need to add a graphical user interface (GUI) to server1. Which tool should you use?
A. the Add-WindowsFeature cmdlet
B. the Add-WindowsPackage cmdlet
C. the Install-Module cmdlet
D. the setup.exe command
Answer: A
70-410特典
NO.4 Your network contains three servers that run Windows Server 2012 R2. The servers are
configured as shown in the following table.
Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?
A. A reservation
B. A scope option
C. A filter
D. An exclusion
Answer: C
70-410再テスト 70-410復習資料
Explanation:
A. For clients that require a constant IP address
B. Filter to exclude MAC address of Server3
C. Range of allowed IP's to be assigned
D. Exclude range of IP's MAC address based filtering ensure that only a known set of devices in the
system are able to obtain an IPAddress from the DHCP Reservation and Exclusion, two incredibly
different concepts. An exclusion is an address or range of addresses taken from a DHCP scope that
the DHCP server is not allowed to hand out. For example, if you have set a DHCP server to exclude
the address range 192.168.0.1-192.168.0.10 then the only way a computer on your network would
get an address of 192.168.0.4 would be if you assigned it statically on that machine. This is because
DHCP knows NOT to give this range of IP addresses out. A reservation is a specific IP addresses that is
tied to a certain device through its MAC address. For example, if we have a workstation on the
network that requires a certain IP address, but we don't want to go through to trouble of assigning it
statically, then we can create a reservation for it. So if the MAC address of the NIC on the computer is
AA-BB00FF-CC-AA and we want it to maintain the IP address of 192.168.0.100 then we would create
a DHCP reservation under that particular scope saying that the IP address
192.168.0.100 is reserved only for the MAC address AA-BB-00-FF-CC-AA.
Reference: http://technet.microsoft.com/en-us/magazine/ff521761.aspx
70-410試験感想を受験したいですか。70-410試験感想を取得したいですか。試験に準備する時間が足りないあなたは、どうやって試験に合格できますか。しようがないわけではないです。短時間の準備でも楽に試験に合格することができるようになりますよ。それでは、どのようにすればそれを達成できますか。実は方法がとても簡単です。すなわちJapanCertの70-410試験感想を利用して試験の準備をすることです。
試験番号：70-410試験感想試験科目：「Installing and Configuring Windows Server 2012」
最近更新時間：2016-12-11
問題と解答：480
試験番号：70-334受験準備試験科目：「Core Solutions of Microsoft Skype for Business 2015」
最近更新時間：2016-12-11
問題と解答：50
JapanCertは当面最新のMicrosoftの70-334受験準備の認証試験の準備問題を提供している認証された候補者のリーダーです。弊社の資源はずっと改訂され、アップデートされていますから、緊密な相関関係があります。Microsoftの70-334受験準備の認証試験を準備しているあなたは、自分がトレーニングを選んで、しかも次の問題を受かったほうがいいです。弊社の試験問題はほとんど毎月で一回アップデートしますから、あなたは市場で一番新鮮な、しかも依頼できる良い資源を得ることができることを保証いたします。
IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてMicrosoftの70-410試験感想に参加して認可を得たくて、Microsoft の70-410試験感想が難度の高いので合格率も比較的低いです。JapanCertの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。
JapanCertを通してMicrosoft 70-334受験準備に合格することがやすくて、Microsoft 70-334受験準備をはじめて受ける方はJapanCertの商品を選んで無料なサンプル（例年の試験問題集と解析）をダウンロードしてから、楽に試験の現場の雰囲気を体験することができます。オンラインにいろいろなMicrosoft 70-334受験準備集があるですけれども、弊社の商品は一番高品質で低価額で、試験の問題が絶えず切れない更新でテストの内容ともっとも真実と近づいてお客様の合格が保証いたします。それほかに、弊社の商品を選んで、勉強の時間も長くではありません。できるだけ早くMicrosoft 70-334受験準備を通ろう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/70-410.html
